Textures finishes

Natural wood veneered boards with textured finishes – rusticated

  1. CHOOSING THE JUNTION OF THE PLATE
    See in characteristics in TYPE OFJUNCTION. Reversed pattern, combined, not combined, rustic splint (with this finish, the appearance of solid wood is best achieved)
  2. SELECTION OF VENEER SHEET
    Once the type of junction has been selected, we must choose the type of natural sheet to proceed to its manufacture. We recommend porous veneers such as Oak, Ashtree, Chestnut, etc., in order to achieve the best desired texture effect.
  3. THICKNESS OF THE SHEET
    We will choose the thickness of the sheet according to the touch we want to achieve  (see textures / rusticated)
  4. TYPE OF TEXTURES – RUSTICATED   

R
0,6mm Sheet

RR
0,6mm Sheet

RRR
1mm Sheet

RRVT
With 0.6mm sheet
Reversed pattern or counter-pattern board. A scratching is produced in the direction of the pattern plus the texture of the RR.