Veneers quality

Boards / panels veneered with natural wood designed for Cabinetmakers, Architects, Interior designers,
So they can design and create interior spaces with style.

  1. Upper face: Choose the type of decorative natural wood veneer
  2. Board: Choose the interior base you want, Chipboard, MDF board, Plywood board, specify the dimensions and thickness of the board within the wide range we have.
  3. Anti-contraction: Raclima always recommends to add a sheet on the bottom of the veneered board with the same thickness of the top sheet so that the board achieves greater stability.

the underside of the board veneered with the same

CHOICE OUT OF THREE KINDS OF QUALITIES FOR THE UPPER FACE (1):

A +: Veneer quality for decorative use, uniform logs in pattern and tone
Good structure of the grains, No natural defects of the wood are allowed

A  Standard: Pattern more moved than the previous one, it admits some natural defect. Smaller sequence of logs
Good quality-price ratio,

AC Commercial: May have knots or defects, gleam, less emphasis on structure and tone,
With no log sequence

CHOICE OF VENEERS FOR THE UNDERSIDE (3):

B: Same kind of veneer as the one chosen in the upper part (1) with natural wood defects, without being open

B1: Same as B quality, but with more exaggerated natural defects and with more changes in colour and structure.

C: Is any other compensatory veneer different from the one chosen on the upper face (1) but with the same thickness. This quality is used on boards where this face is not visible, simply so that the board has stability.